Wood Fired Thermic Fluid Heater Manufacturers in Thiruvannamalai – Eco-Friendly Heating Solutions
Explore reliable wood-fired thermic fluid heater manufacturers in Thiruvannamalai providing eco-friendly, energy-efficient heating systems for various industrial applications at THERMTECH Systems. Get customized solutions for your heating needs. Contact us today!
In industries where precise and consistent heating is required, Wood fired thermic fluid heaters are an efficient and versatile solution. As leading Wood fired thermic fluid heater manufacturers in Thiruvannamalai, we specialize in providing high-performance heating systems tailored to various industrial applications. Our solutions are designed to deliver reliable and energy-efficient heat transfer for your operations.
Thermtech Systems’ Wood fired Thermic Fluid Heaters are engineered for precision heating with high efficiency and safety. Designed to handle temperatures up to 300°C or more without the need for high-pressure systems, these heaters provide reliable performance for a variety of industrial applications.
What is a Wood fired Thermic Fluid Heater?
A Wood fired thermic fluid heater is a closed-loop heating system that uses thermic fluid as a heat carrier to transfer energy from a heat source to the process equipment. Unlike steam-based systems, Wood fired thermic fluid heaters operate at higher temperatures without the need for high-pressure operations, making them safer and more efficient.
Wood fired THERMIC FLUID HEATERS are heating equipment used in industries where heat transfers are the primary need of the process instead of Steam pressure.
An industrial heating system that transfers heat from one medium to another uses thermal fluid as the heat transfer medium. It is ideal for processes where the temperature requirement is as high as 300 degrees C.
They are typically used in applications where high temperatures and low pressures are required, Thermtech Systems’ Wood fired Thermic Fluid Heaters are engineered for precision heating with high efficiency and safety. Designed to handle temperatures up to 300°C or more without the need for high-pressure systems, these heaters provide reliable performance for a variety of industrial applications.
These heaters are commonly used in various industries, such as
Our products are used in various industries, such as
- Rice Mill Industries
- Pharma & Bulk Drugs Industries
- Chemical Industries
- Textile Industries
- Packaging Industries
- Food & Beverages
- Animal Feed Industries
- Tyres Industries
- Aromatic & Solvent Extraction
- Rubber Reclaim Industries
- Automobiles Industries
- Oil Refinery & Petrochemical
- Fertilizer Industries
- Paper Industries
- Distillery Plants
- Common Effluent Treatment Plant
Advantages of Wood fired Thermic Fluid Heaters Manufactured by Therm Tech Systems
- Energy Efficiency: Wood fired Thermic fluid heaters offer excellent thermal efficiency, reducing fuel consumption and operational costs.
- High Operating Temperatures: These systems can achieve temperatures up to 400°C without requiring pressurization.
- Flexibility: They support a variety of fuels, including oil, gas, coal, and biomass, depending on the application and availability.
- Safety: Operating at atmospheric pressure eliminates the risks associated with high-pressure steam systems.
- Low Maintenance: With fewer components compared to steam-based systems, Wood fired thermic fluid heaters require minimal maintenance.
Types of Wood fired Thermic Fluid HeaterManufacturered by Thermtech Systems, Thiruvannamalai
Wood Fired thermic fluid Heaters
Solid Fuel-Fired Conventional-Type Thermic Fluid Heater
| Certification | IBR Approved |
| Usage/Application | Industrial |
| Brand | THERMTECH SYSTEMS, Thiruvannamalai |
| Capacity | 50000 to 3000000 kcal/hr. |
| Fuel | Wood, Briqquetts, Biomass, Coal |
| Country of Origin | Made in India |
- Skid-mounted type Wood fired thermic fluid heaters are designed to be quickly erected and commissioned in less time.
- Conventional Wood fired thermic fluid heaters are designed to maximize the heat transfer area for maximum efficiency, reducing the boiler room construction cost and area and the refractory cost.
- The convective coil Pressure parts are fabricated from high-temperature-resistant carbon steel tubes Bs 3059. Two conductive helical coils are mounted directly over the furnace for maximum radiation heat absorption.
- The coil is housed in a shell fabricated from M.S. Plates (IS 2062 Gr. A/B), and a top and bottom shell refractory is done.
- Cyclones-air furnaces are designed like pellet burners with fuel flexibility to minimize fuel unburnt percentage, less excess air, and increase refractory life.
- The furnace has a fire door assembly with graded CI fire bars and proper air gaps for efficient combustion. Using a multifuel fire bar, we can use all kinds of fuels, such as wood, solid coal, and husk.
- Air preheater cum cyclone filter has a shell & tube type heat exchanger, which preheats combustion air by flue gas coming from Coil assembly & thus increases efficiency by 4-5%; Cyclone type Dust collector, which ensures ash collection from flue gas.
- The expansion tank is sized for thermal accommodation expansion of the thermic fluid in the system, and the gasser vessel is uniquely designed for de-aerating the heating media and removing low boil vapours. It has a level indicator, nozzles for overflow, a drain vent, and a magnetic float switch.
- Electrical control panel: Dust-protected, Powder coated, prewired electric & control panel with necessary contactors, control switches, and safeties
Oil Fired thermic fluid Heaters
THREE PASS OIL/GAS FIRED THERMICFLUID HEATERS -FFT SERIES
| Certification | IBR Approved |
| Usage/Application | Industrial |
| Brand | THERMTECH SYSTEMS, Thiruvannamalai |
| Capacity | 50000 to 3000000 kcal/hr. |
| Fuel | HSD, CNG, LPG, FO, Biodiesel, pellet |
| Country of Origin | Made in India |
SPECIAL FEATURES
- Three pass Design
- Horizontal /Vertical design
- Less fuel consumption
- Higher efficiency 70% to 80 %
- Less external exposed heating surface to reduce heat loss
The Wood fired thermic fluid heater is a packaged, fully automatic, HSD/CNG/LPG fuel-fired liquid phase heater.
It comprises a double-helical heat exchange coil, which forms the combustion chamber and provides the heating surface in an optimally designed configuration.
The coil is enclosed in an outer shell. The outer shell is then Insulated with a ceramic blanket and clad with a GI-colored sheet to conserve radiation heat loss from the surface and keep the outer cover near ambient temperature.
It comes on a skid mounted in ready-to-use condition. It has a thermic fluid circulating pump with a motor, a fully automatic imported burner, a de-aerator, and expansion vessels with nitrogen blankets that are provisioned to operate at maximum temperature, along with all control panels and safety features.
Thermtech Systems’ Three-Pass Oil/Gas-Fired Wood fired Thermic Fluid Heaters are designed to deliver superior thermal efficiency and consistent performance, making them an ideal choice for industries requiring high-temperature heating solutions.
Electrical Heating Thermic Fluid Heaters
Electrical Heating Thermic Fluid Heaters
| Certification | IBR Approved |
| Usage/Application | Industrial |
| Brand | THERMTECH SYSTEMS, Thiruvannamalai |
| Capacity | 20000 to 600000 kcal/hr |
| Fuel | Electrical |
| Country of Origin | Made in India |
SPECIAL FEATURES
- Fully automatic
- Low maintenance.
- Easy to install and can be located close to the point of use.
- Environmentally friendly and pollution-free.
- Less floor space.
- Efficiency 70% to 80 %
A Wood fired thermic fluid heater is a packaged, fully automatic, liquid-phase heater.
It comprises a thermic fluid storage shell within a direct ceramic electric heater. Ceramic heaters mounted in the MS pipe. The pipe is in direct contact with thermic fluid oil. Thermic fluid circulating pipe is then further insulated with an insulation blanket and clad with a coloured sheet to conserve radiation heat loss from the surface and keep the external shell near ambient temperature.
Cast steel centrifugal air-cooled thermic fluid circulating pumps are duly coupled with a motor and mounted on a base frame.
The expansion tank is sized for thermal accommodation expansion of the thermic fluid in the system, and the gasser vessel is uniquely designed for de-aerating the heating media and removing low boilvapours. It has a level indicator, nozzles for overflow, a drain vent, and a magnetic float switch.
